You are hereFeed aggregator
Feed aggregator
End Pour vs End Block
Nick's Blog - Tue, 01/24/2012 - 18:06
The End Pour
A common question is "what is the end pour good for?" For those who don't know what it is, it originated in making fiberglass kayaks. The boat is stood on end, leaned up against the wall or a try and epoxy is poured into the end. This epoxy fills up the end with a solid chunk of material. This serves a couple purposes.
Meet at the Beach 2012
Events - Sat, 01/21/2012 - 16:27
Start: Jun 2 2012 10:00 am End: Jun 3 2012 3:30 pm Start: Jun 2 2012 10:00 am End: Jun 3 2012 3:30 pm
Once again we will gather to see what everyone has accomplished over the winter. Every year for over 10 years we have been meeting at the beach at Bluff Point State Park in Groton, CT to talk about making kayaks. If you are interested in making your own kayak, just like to look at kayaks or have built your own you are welcome. Bring a boat if you have one, but it doesn't have to be home made.
Meet at the Beach 2012
Nick's Blog - Sat, 01/21/2012 - 16:27
Start: Jun 2 2012 10:00 am End: Jun 3 2012 3:30 pm Start: Jun 2 2012 10:00 am End: Jun 3 2012 3:30 pm
Once again we will gather to see what everyone has accomplished over the winter. Every year for over 10 years we have been meeting at the beach at Bluff Point State Park in Groton, CT to talk about making kayaks. If you are interested in making your own kayak, just like to look at kayaks or have built your own you are welcome. Bring a boat if you have one, but it doesn't have to be home made.
Elements of Kayak Design at RICKA
Events - Sat, 01/21/2012 - 15:39
Start: Mar 19 2012 7:00 pm Start: Mar 19 2012 7:00 pm
Ganymede Offsets - Free Plans to Build the Ganymede Kayak
Nick's Blog - Thu, 01/05/2012 - 18:49
How to Make a Kayak - Fiberglassing the Inside
Nick's Blog - Mon, 12/19/2011 - 09:14
I'm using 4 ounce glass on the inside.
The "Dookey Schmutz" Award
Nick's Blog - Fri, 12/16/2011 - 11:39
Sometime back in the mid to early 1990's I read an article in WoodenBoat Magazine about building an icebox. I just did a little research and found the article. It was "Building a Proper Icebox" by Jim Brown in WoodenBoat Issue #99. You can read the article below. This is where I first came across the idea that a thick mixture of powder and epoxy has a name. What Jim said was:
How to Make a Kayak - Cleaning up the Interior
Nick's Blog - Fri, 12/16/2011 - 09:25
For me cleaning up the inside of the boat is one of the least satisfying aspects of building the kayak.
How to Make a Kayak - Scraping, Sanding and Fairing and Dust Control
Nick's Blog - Sun, 12/11/2011 - 15:42
ScrapingI first scrape the boat with a heavy duty paint scraper. This removes the any glue drips and starts to knock the corners off the strips.
Fine Strip-Planked Boat Construction at WoodenBoat School in Brooklin, Maine
Events - Fri, 11/25/2011 - 12:27
Start: Jul 10 2012 8:00 am End: Jul 16 2012 12:00 pm Start: Jul 10 2012 8:00 am End: Jul 16 2012 12:00 pm A guide to building canoes and kayaks with wood strips and epoxy.
Building the Night Heron Videos
Nick's Blog - Thu, 11/17/2011 - 13:11
I'm building a Night Heron kayak using cove and bead western red cedar. I'm taking some video as I go. I hope you find the following helpful.
Stripping the deck of the Night Heron kayak using Cove and Bead cedar strips
Nick's Blog - Thu, 11/17/2011 - 12:55
Sheer Strips
Like the hull, I used strips taped to the bottom of a bench plane to make consistent width strips with the bead removed. These strips were then beveled to create a tight joint with the sheer strips on the hull. At the ends the sheer strips need to be tapered to meet each other at a nice point.
Building the Petrel Sea Kayak Videos
Nick's Blog - Wed, 10/19/2011 - 17:29
In 2010 I started making a strip-built Petrel sea kayak using cedar strips, fiberglass and Carbon-Kevlar Cloth. I documented much of the process on video and below are the short videos I produced showing many of the building techniques incorporated. The above video provides a quick overview, follow the links below for more detailed looks at the individual steps.
Strip Planked Boat Material and Weight Calculator
Nick's Blog - Wed, 10/19/2011 - 15:23
Anyone building a strip-built boat from scratch eventually has to decide how much wood they need. At the same time they may be curious as to how much the boat is going to weigh. While it is not immediately obvious that these two questions are related, they both depend on the surface are of the boat. Every square foot of the surface needs to be covered with wood and every bit of wood weighs something.